Possible causes of a motion sensor night light remaining on at night: 1. Oversensitive sensor 2. Improper sensor placement 3. Changes in ambient temperature and humidity 4. Sensor malfunction or failure 5. Low battery 6. Human interference or external factors
A magnetic LED night light is a lighting device that integrates an LED light source and utilizes a magnetic design. Unlike traditional night lights that are fixed to a socket or powered by batteries, magnetic LED night lights use built-in magnets or external metal brackets to attach or attach to various metal surfaces, allowing for flexible installation and mobility.
The bottom edge of an LED wall light fixture should be installed 30 to 36 inches (approximately 76 to 91 cm) from the vanity surface. This height ensures that the light directly hits the user's face and avoids shadows caused by angles that are too high or too low.
Most LED wall light fixtures are fixed to the wall using screws or nails. While this installation method ensures stability and security, improper installation can leave marks on the wall, especially when removing the fixture, as screw and nail holes often leave marks on the wall.
In professional lighting terminology, "vanity" refers to the dressing area, often closely associated with personal grooming, makeup, and skincare. "Wall light" describes its installation method—a fixture mounted on the wall. Therefore, the combined "vanity wall light" directly describes a lighting fixture installed on the wall of the dressing area.
Choosing the right sensor type based on your needs can effectively improve the performance of your light fixture. For example, if the main application is in a home garden or front door, a PIR sensor is an ideal choice; if a wider detection range is required, a microwave or ultrasonic sensor may be more suitable.
LED spotlights are classified into the following types: 1. Classification by Beam Angle • Narrow Beam LED Spotlights • Medium Beam LED Spotlights • Wide Beam LED Spotlights 2. Classification by Design • Recessed LED Spotlights • Surface-Mounted LED Spotlights • Portable LED Spotlights • Waterproof LED Spotlights 3. Classification by Color Temperature • Warm White LED Spotlights • Cool White LED Spotlights • RGB LED Spotlights
If you're looking for simple, even lighting, round LED lamps are undoubtedly the better choice. If you prefer a modern, unique decorative effect, square LED lamps are more suitable. Ultimately, consumers can choose the most suitable LED lamp based on their space needs, design style, and desired lighting effects.
An integrated LED downlight is a downlight that integrates various components, including the LED light source, driver, and cooling system, into a single fixture. Compared to traditional LED downlights, integrated LED downlights do not have separate light sources and driver. Instead, these components are designed and installed in a single body.
LED lighting fixtures usually have built-in heat dissipation devices to reduce heat, but if the working environment temperature is too high, the heat dissipation effect may be insufficient, which will shorten the service life of the LED lights and even cause premature failure.
Most motion-activated LED lights offer a time delay setting. Users can customize the delay parameters according to actual needs, such as setting the light to stay on for 30 seconds, 60 seconds or longer after detecting motion. This setting is mainly achieved through the built-in control circuit.
LED track lights are track-mounted lighting fixtures based on LED light sources. Their key feature is that the lamp body is mounted on a track system and can slide or rotate freely on the track to adjust the direction and range of illumination.