• General bedroom: 30-40 lumens/m2 • Large bedroom or master bedroom: 40-50 lumens/m2 • Bedside area: The brightness of the bedside lamp should be moderate, generally around 100 lumens (can be adjusted appropriately according to specific needs).
For wardrobes, 5000K LED lamps are not "too bright", but a choice with higher brightness and clarity. It can provide users with accurate color reproduction and efficient lighting effects, especially suitable for places where clothes need to be selected quickly and details need to be clearly displayed.
Night lights usually need to be turned on for a long time, and the long life characteristics of LED lamps make them very suitable for this purpose. The life of LED night lights can usually reach more than 25,000 hours, compared with the much shorter life of traditional bulbs.
In theory, the night lamp with USB charger is designed to be able to be plugged in continuously without causing damage to the device. However, whether it can be plugged in for a long time depends on many factors, including the design quality of the device, the use environment and daily maintenance.
If the heat dissipation design of LED lamps is poor, the high temperature of LED chips will accelerate their aging. High temperature will cause electron migration inside the chip, which will reduce its luminous efficiency and eventually lead to brightness decay.
For LED downlights installed in the bathroom, although many LED lamp designs use electrical insulation protection, grounding is still very important because the bathroom is a humid environment. For LED downlights without insulation design, grounding is a necessary measure to ensure their safe use.
Pros of LED recessed downlights: 1. Energy-saving and high efficiency 2. Modern and simple appearance design 3. Uniform light effect and reduced glare 4. Flexible installation methods 5. Adapt to a variety of scenarios and needs Cons of LED recessed downlights: 1. High installation requirements 2. Inconvenient maintenance 3. Restrictions on light adjustment 4. High cost
Standard ceiling (2.4-2.7 meters): This is a common height in most homes and offices. At this height, the distance between two LED lamps is generally recommended to be between 1/3 and 1/2 of the width of the room.
1. Advantages of LED recessed downlights (1) Energy-saving and high efficiency (2) Long life (3) Simple and beautiful appearance (4) Uniform lighting effect (5) Strong adaptability and flexible installation (6) Low heat and environmental protection 2. Disadvantages of LED recessed downlights (1) Holes need to be reserved for installation (2) Heat dissipation problems (3) Difficult to repair (4) High initial cost (5) Concentrated light source and lack of flexibility
Traditionally, LED lamps are usually controlled by manual switches. The existence of a switch allows users to easily turn on or off the lamp when needed, ensuring the convenience and energy saving of lighting. In this case, the switch is usually installed near the entrance, such as the kitchen door or next to the cabinet, so that users can easily operate it manually.
Advantages of surface mount LED lights: 1. High efficiency and energy saving 2. Long life and low maintenance cost 3. Compact design and flexible installation 4. Green and environmentally friendly with no harmful substances 5. Instant light on and no flicker Disadvantages of surface mount LED lights: 1. Higher price 2. Overheating problem 3. Limited light distribution 4. Not applicable to all locations
For a standard dressing table, it is recommended to install two wall lamps on both sides of the mirror, usually between 24 inches (about 61 cm) and 36 inches (about 91 cm). This spacing usually ensures that the light is evenly irradiated to the face, avoids local shadow problems, and ensures the comfort of the lighting effect.