News

When people need to get up at night, 1W to 2W LED night lights can provide enough light without affecting sleep quality. These low-wattage LED night lights not only help avoid strong light stimulation, but also reduce disturbance to other family members through soft lighting.

If the delay time is set too long, users may find that the motion activated led night light stays on for much longer than it actually needs to. For example, if the sensor is set to a delay of 10 minutes, the LED light will stay on for 10 minutes even if the user has left the room.

The power provided by the USB interface is usually 5V DC, and the battery and circuit design of modern LED night lights are usually able to match this voltage. Therefore, it is completely feasible to charge the LED night light using the USB interface, provided that the LED night light itself is designed to support USB charging function.

The working principle of infrared sensors is based on the detection of heat, so any temperature fluctuations may affect the response of the sensor. Sometimes, even if there is no object in the sensing range of the sensor, the sensor may misjudge and trigger the lamp to turn on.

Automatic sensor night lamp is an intelligent lighting device that can automatically light up or turn off according to environmental conditions. Unlike traditional night lights, it does not require manual switches, but relies on built-in sensors to automatically detect light, human body or other physical changes to intelligently control the on and off of lights.

The following are common usage scenarios of the motion sensor led night light and the corresponding lumen values: 1. Bedroom and corridor lighting (between 20 and 100 lumens) 2. Staircase and bathroom lighting (between 50 and 150 lumens) 3. Kitchen and porch lighting (between 100 and 200 lumens)

LED night light bulbs have a higher energy utilization rate, usually converting 80%~90% of electrical energy into light energy, and only 10%~20% of the energy is dissipated in the form of heat energy.

The sensor sensitivity is too high Most LED night light lamps are equipped with sensitive motion sensors to respond quickly to motion in low-light environments. However, if the sensor sensitivity is set too high, it may react to minor environmental changes or non-human movements.

The sensor is blocked or installed in an improper position LED motion sensor night light relies on sensors to detect motion, and if the sensor's sensing area is blocked or the light is installed in an improper position, it will cause the sensing function to fail.

Many modern LED night light lamps have a "constant light mode" option. In this mode, the lamp does not rely on the trigger of the motion sensor, but is kept on all the time directly through the switch or remote control.