Industry News

In general, the manufacturing cost of LED recessed lamps is higher than that of traditional halogen or fluorescent recessed lamps, but compared with LED downlights, their cost is usually slightly lower, especially when complex heat dissipation systems and high-efficiency LED chips are not used.

Based on the actual measurement results, you need to choose the length of the strip. Under cabinet led strips usually have standard lengths, such as 1 meter, 2 meters, etc. If your cabinet is longer, you can splice multiple strips together. Generally speaking, the length of a single LED strip is about 1 meter, and longer cabinets may require 2 or 3 strips.

When integrated LED lighting lamps burn out, the possible effects are: 1. Safety hazards (short circuit, overheating or electrical fire) 2. Equipment damage 3. Impaired lighting effect

Linear LED lighting has a higher brightness and is suitable for areas that require higher light, especially in offices, kitchens, garages, etc., which require sufficient brightness to meet work needs. Contour lighting usually has softer light and lower brightness. It is mainly used to provide auxiliary light sources and decorative effects, rather than to provide main lighting.

At night or in low-light environments, the sensor continuously monitors human activity in its sensing area. When a human body appears within its sensing range (i.e. 0-3 meters), the sensor converts the sensing signal into an electrical signal, activates the LED light, and automatically lights up the lamp.

LED lighting downlight refers to a cylindrical embedded lamp that uses LED light source as lighting. It is generally installed on the ceiling or other blank positions where light source is required, and the light is irradiated downward through the outer shell of the lamp.

The driver power supply is one of the core components of LED lamps. Its main function is to convert the power supply voltage into a DC voltage suitable for the operation of the LED lamp beads. If the driver power supply is of poor quality or unstable, it may cause damage.

·IP44 protection level: Applicable to dry areas of the bathroom, such as areas near the washbasin and mirror that are not directly exposed to water. ·IP65 protection level: Applicable to wet areas of the bathroom, such as shower rooms, above bathtubs, and other areas that may be directly exposed to water flow or water vapor. ·IP67 or higher protection level: Applicable to extremely humid environments, such as outdoor bathrooms or places that need to be completely immersed in water.

Recessed led panel light refers to a flat LED lamp that can be embedded in the ceiling, wall or other surface space. Its shape is usually rectangular, square or round, with a simple and modern design.

The faults that cause the motion sensor night light to be always on include: 1. The sensor sensitivity is too high 2. The sensor's sensing angle is improper 3. Heat interference in the environment 4. Sensor damage or failure 5. Low battery or poor battery contact 6. Line short circuit or electrical failure 7. Interference from external light sources 8. Sensor misoperation or environmental factors