● Light sensor night light: automatically turns on and off the light by detecting the light intensity of the environment. The light will only turn on automatically when the light is dim. ● Motion sensor night light: controls the switch of lamps by sensing the movement of objects in the surrounding environment, usually using infrared sensors or ultrasonic sensors.

It depends on the area of ​​the living room. Generally, a living room with an area of ​​20 to 30 square meters can be equipped with 1 to 2 motion sensor night lights for auxiliary lighting control; if the living room is large or requires zoned lighting, the number can be appropriately increased.

The reasons why motion sensor night lights burn out are: 1. Unstable voltage or power overload 2. Quality problems and manufacturing defects 3. Long-term overuse 4. Hardware aging 5. Improper use environment

Reasons why the indoor motion sensor night light cannot be turned off: 1. The sensor fails to correctly detect the cessation of motion 2. The sensor sensitivity is set too high 3. Continuous environmental changes

Corridors and aisles are one of the most commonly used areas in homes and offices, especially when used at night, which is often inconvenient due to insufficient light. At this time, placing a motion sensor night light can automatically light up when someone passes by, bringing good lighting effects.

✅ Check the indicator light status to see if there is any response ✅ Perform manual motion detection to observe whether the light responds to the movement ✅ Check the power supply status, replace the battery or check whether the USB power supply is normal ✅ Ensure that the ambient light is appropriate to avoid the light sensor misjudgment causing the light to not turn on ✅ Check the night light mode setting to ensure that it is in "Auto mode"

● There are still objects moving within the sensing range: adjust the installation position to avoid detecting unnecessary movement. ● Misjudgment of environmental factors: avoid installing near heat sources or electromagnetic interference areas. ● Delay time is too long: check the manual and set the time reasonably. ● Sensor or circuit failure: try to restart the device, replace the sensor if necessary or contact after-sales. ● Light sensing mode error: adjust the light sensing mode or turn off the light sensing function.

LED Motion Sensor Night Light usually has a specific sensing range (usually 2-5 meters) and sensing angle (usually 120° or 180°). If the user moves outside the sensing range, the sensor may not detect human motion, causing the light to turn off prematurely.

Places not suitable for installing LED Motion Sensor Night Light ● Areas exposed to direct sunlight (such as windows and balconies) ● Humid or splash-prone places (such as bathrooms and near kitchen sinks) ● Metal surfaces or large areas of metal (such as refrigerators and metal cabinets) ● Overheated environments (such as radiators, stoves, and air-conditioning outlets) ● Too narrow or enclosed spaces (such as drawers and inside cabinets) ● Areas with strong light interference (such as near TVs and computer screens)

✅ Adjust the sensing range: If the night light supports adjustment, reduce the sensing distance and angle. ✅ Optimize the installation location: Keep away from interference factors such as heat sources, air vents, windows, etc. ✅ Physical shielding: Use stickers or light shielding sheets to reduce the sensor's sensing range. ✅ Switch to low sensitivity mode: If the night light supports this function, the probability of false triggering can be reduced.

● Physical method: cover the sensor, adjust the installation position, or disconnect the sensor circuit. ● Electronic method: use manual mode, adjust the sensitivity, or turn off the motion detection function in the smart APP.

✅ Yes, but you need to choose the right tape, ensure sufficient adhesion, and avoid covering the sensor and heat dissipation parts. ❌ It is not recommended to use ordinary tape or cover key components, otherwise it may affect the sensing function, heat dissipation effect, and even shorten the life of the lamp.