News

Common settings for the lighting status of motion sensor nightlights include: • 30 seconds • 1 minute • 3 minutes • 5 minutes If you want the motion sensor nightlight to stay on longer, simply adjust the delay parameter to a higher level.

Power Input Port (Charging Function) This is the most important and common use. The vast majority of motion sensor nightlights with USB ports are for charging. These nightlights have built-in rechargeable lithium batteries that are charged via a USB connection to a power source.

Remember not to mix excessively warm and excessively cool light sources, otherwise, skin tone discrepancies and uneven lighting will occur. If one bathroom vanity lamp is too yellow and another is too white, it will cause uneven skin tones reflected in the mirror.

The key to bedroom lighting at night is to be both gentle and comfortable, and practical enough. This is precisely where motion sensor nightlights strike the perfect balance. They provide just the right amount of illumination in the dark, while automatically controlling their on/off state to avoid disturbing others or wasting energy.

Referring to the International Electrotechnical Commission (IEC) standards for bathroom zone classification: Most home vanities are located in Zone 2 or the dry zone. An IP44-rated bathroom vanity light is both economical and safe, fully meeting daily usage needs.

Energy saving is one of the key reasons why families choose LED motion sensor nightlights. Traditional nightlights, if left on for extended periods, not only waste energy but also increase electricity bills. LED motion sensor nightlights, through intelligent sensing, achieve precise lighting, significantly reducing energy consumption.

It's often a working signal from the internal system of the light fixture, used to indicate different operating states, such as: • The sensor is detecting motion; • The device is in standby or pairing mode; • Low battery; • The sensor has entered test mode; • Circuit malfunction or photosensor error.

A basic and widely used rule of thumb is: Choose a light fixture that is approximately 75% the width of your vanity and install it directly above the mirror, about 75 to 85 inches above the mirror. In other words, assuming your vanity is 48 inches wide, the ideal bathroom vanity light should be around 36 inches wide.

The color rendering index (CRI) is an optical indicator proposed by the International Commission on Illumination (CIE) to measure the accuracy with which a light source reproduces the colors of objects. It is expressed as a percentage; the higher the value, the more accurate the color reproduction of the light source.

Vanity wall lights are not suitable for all makeup mirror sizes. Large mirrors or mirrors of varying heights require wall lights of corresponding length, brightness, and installation height; smaller mirrors require relatively short wall lights with adjustable light sources.