News

If the delay time is set too long, users may find that the motion activated led night light stays on for much longer than it actually needs to. For example, if the sensor is set to a delay of 10 minutes, the LED light will stay on for 10 minutes even if the user has left the room.

The reasons why motion sensor night lights burn out are: 1. Unstable voltage or power overload 2. Quality problems and manufacturing defects 3. Long-term overuse 4. Hardware aging 5. Improper use environment

Reasons why the indoor motion sensor night light cannot be turned off: 1. The sensor fails to correctly detect the cessation of motion 2. The sensor sensitivity is set too high 3. Continuous environmental changes

Corridors and aisles are one of the most commonly used areas in homes and offices, especially when used at night, which is often inconvenient due to insufficient light. At this time, placing a motion sensor night light can automatically light up when someone passes by, bringing good lighting effects.

A motion sensor hallway night light is an intelligent lighting device that combines a night light with a motion sensor. It detects the movement of the surrounding environment through a built-in motion sensor (usually an infrared sensor or a microwave sensor), and controls the switch of the light according to the sensed activity.

Generally, the service life of a high-quality LED light source is between 30,000 and 50,000 hours, which means that if used for 8 hours a day, the service life of the LED light source is about 10-17 years.

Depending on the type and design of the lamp, the brightness of wireless motion sensor light can range from tens of lumens to thousands of lumens. Generally speaking, the lumen value of common wireless motion sensor light is usually between 300 and 1500 lumens.

✅ Check the indicator light status to see if there is any response ✅ Perform manual motion detection to observe whether the light responds to the movement ✅ Check the power supply status, replace the battery or check whether the USB power supply is normal ✅ Ensure that the ambient light is appropriate to avoid the light sensor misjudgment causing the light to not turn on ✅ Check the night light mode setting to ensure that it is in "Auto mode"

● There are still objects moving within the sensing range: adjust the installation position to avoid detecting unnecessary movement. ● Misjudgment of environmental factors: avoid installing near heat sources or electromagnetic interference areas. ● Delay time is too long: check the manual and set the time reasonably. ● Sensor or circuit failure: try to restart the device, replace the sensor if necessary or contact after-sales. ● Light sensing mode error: adjust the light sensing mode or turn off the light sensing function.

LED Motion Sensor Night Light usually has a specific sensing range (usually 2-5 meters) and sensing angle (usually 120° or 180°). If the user moves outside the sensing range, the sensor may not detect human motion, causing the light to turn off prematurely.