News

Places not suitable for installing LED Motion Sensor Night Light ● Areas exposed to direct sunlight (such as windows and balconies) ● Humid or splash-prone places (such as bathrooms and near kitchen sinks) ● Metal surfaces or large areas of metal (such as refrigerators and metal cabinets) ● Overheated environments (such as radiators, stoves, and air-conditioning outlets) ● Too narrow or enclosed spaces (such as drawers and inside cabinets) ● Areas with strong light interference (such as near TVs and computer screens)

✅ Adjust the sensing range: If the night light supports adjustment, reduce the sensing distance and angle. ✅ Optimize the installation location: Keep away from interference factors such as heat sources, air vents, windows, etc. ✅ Physical shielding: Use stickers or light shielding sheets to reduce the sensor's sensing range. ✅ Switch to low sensitivity mode: If the night light supports this function, the probability of false triggering can be reduced.

● Physical method: cover the sensor, adjust the installation position, or disconnect the sensor circuit. ● Electronic method: use manual mode, adjust the sensitivity, or turn off the motion detection function in the smart APP.

✅ Yes, but you need to choose the right tape, ensure sufficient adhesion, and avoid covering the sensor and heat dissipation parts. ❌ It is not recommended to use ordinary tape or cover key components, otherwise it may affect the sensing function, heat dissipation effect, and even shorten the life of the lamp.

The production steps are summarized as follows: ● Design the circuit schematic to ensure that all components are connected correctly. ● Build the circuit and test it, and use a breadboard for preliminary testing. ● Install LED lights and sensors to ensure the best sensing range. ● Make the shell to improve the aesthetics and durability. ● Debug and optimize, adjust the sensitivity, add photosensors, and improve energy saving.

it can be seen that not every room needs to install wireless motion sensor led light. For spaces with frequent activities and stable light requirements, such as living rooms and kitchens, traditional lighting systems are sufficient to meet the needs.

If there are elderly, children or family members with limited mobility in the family, the led motion sensor light can provide safety protection at night. In a dark environment, the automatically lit light can effectively reduce the risk of falling and ensure the safety of family members.

Possible reasons for indoor led sensor light flickering: 1. Unstable power supply voltage 2. Sensor failure or interference 3. Lamp quality problems 4. Installation environment problems 5. Lamp aging

The following are common usage scenarios of the motion sensor led night light and the corresponding lumen values: 1. Bedroom and corridor lighting (between 20 and 100 lumens) 2. Staircase and bathroom lighting (between 50 and 150 lumens) 3. Kitchen and porch lighting (between 100 and 200 lumens)

The motion activated stair lights indoor has an automatic sensing function, which can automatically light up when the elderly approach the stairs without manual switching. It solves the problem of inconvenience of traditional lamp switches, avoids distraction due to looking for switches, and improves safety.